Our ‘OBD Interpreter’ integrated circuits are designed for use with vehicles that use the standard OBDII (On Board Diagnostics) protocols. Most modern vehicles use the CAN (ISO 15765-4) protocol, but yours may not. If you are unsure of what protocol your vehicle uses, see the information in the ‘OBD’ section, under the ‘Help’ menu.

Elm 327 Ver 1.2a; Scan performed on 4/26/2017, Computer: SAMSUN R710 - Windows 7 64 bit. Use the links on this page to download the latest version of ELM327 USB interface drivers. All drivers available for download have been scanned by antivirus. This article will guide you how to install ELM327 USB cable/scanner on your Windows computer. It will then work with any OBD2 software and your car. (If ELM327 USB isn't setup properly as per instructions below — then OBD software will not even detect the cable — let alone connect to the vehicle.). ELM327 VER 1.2A DRIVER FOR WINDOWS DOWNLOAD - To do so, we recommend you do the following. Connect to your vehicle using our software. Check out our tips and advice section for how to know which ELM version you have. I own a small business of renting and selling used 4x4s from UK market. Sorry to bother you, I have a technical question. Uploader: Nakinos Date.

Protocol Support

Once you know the protocol that you need to ‘interpret’, the following chart will help you choose an integrated circuit:

SAE J1850-PWM✓✓ Driver

✓SAE J1850-VPW✓✓✓ISO 9141-2✓✓✓ISO 14230-4 (slow)✓✓✓ISO 14230-4 (fast)✓✓✓ISO 15765-4 (CAN)✓✓✓✓SAE J2411 (SWCAN)✓✓✓✓KW1281 (SAE J2818)SAE J1939 (250kbps)✓✓✓✓SAE J1939 (500kbps)✓✓✓✓SAE J1708 (J1587)✓SAE J1708 (J1922)✓

Note that we have also included a couple of non-OBDII protocols that we are often asked about.

OBD Interpreter ICs

ELM320 – OBD (PWM) to RS232 Interpreter (v2.0)
The ELM320 supports the 41.6KHz SAE J1850 PWM protocol, which was commonly used in many Ford Motor Company vehicles (but has now generally been replaced by CAN).

ELM322 – OBD (VPW) to RS232 Interpreter (v2.0)
Similar to the ELM320, the ELM322 is for connecting to an OBDII equipped vehicle which uses the 10.4KHz SAE J1850 VPW format. This standard was typically used in General Motors and some Chrysler vehicles.

ELM323 – OBD (ISO) to RS232 Interpreter (v2.0)
The ELM323 supports the ISO 9141-2 and ISO 14230-4 standards that are used by many vehicles throughout the world. You may wish to also consider the ELM327, as it offers several options for customizing the timing etc. that is not provided by the ELM323.

ELM325 – J1708 Interpreter (v2.0)
This protocol converter integrated circuit is for use with heavy duty vehicles that use the SAE J1708 standard with J1587 or J1922. Although these protocols are being phased out (they’re being replaced by SAE J1939), there are still a very large number of vehicles that use them.

ELM327 – OBD to RS232 Interpreter
Elm Electronics has been producing the multi-protocol ELM327 integrated circuit since 2005. We have updated the product several times in response to your requests, and as a result have produced many versions of the IC over the years. All versions of the ELM327 support the standard OBDII protocols:

SAE J1850 PWM
SAE J1850 VPW
ISO 9141-2
ISO14230-4
ISO15765-4

In addition, the IC supports various other protocols to varying degrees (SAE J1939, CAN at programmable rates up to 500kbps, ISO 9141 and ISO 14230 at 9600 and 4800 bps, etc.)

The latest ELM327 is available in two voltage ranges:

ELM327 v2.2
Firmware version 2.2 is the most recent well-tested revision. This IC requires a Vdd supply of 4.2V to 5.5V. In May 2020, we also introduced the ELM327 v2.3 product which is very similar but adds an extra filtering layer.ELM327L v2.2
This integrated circuit supports all of the ELM327 v2.2 functions, but operates over a wider range of supply voltages (from 2.0V to 5.5V).

Several customers were reluctant to redesign their proven products so have asked that we continue to stock the following ‘mature’ version of the ELM327:

ELM327 v1.3a
A good basic product that continues to sell well.

The different versions of the ELM327 IC may be a little confusing to some. Perhaps this chart may be of help:

ELM327
v1.3aELM327
v2.2ELM327L
v2.2 Driver

Operating Voltage4.5V to 5.5V4.2V to 5.5V2.0V to 5.5VLow Power (sleep) Mode–✓✓Settings Retained on Wake–✓✓RS232 Transmit Buffer Bytes2565122048AT Commands93128128CAN Frequency Check During Auto Protocol Searches–✓✓Response Pending (7F xx 78) Support–✓✓

ELM329 – CAN Interpreter
With vehicles beginning to only support the CAN protocols, we took an ELM327 and removed support for the non-CAN protocols (but still provide enough command support to allow most ELM327 software to work with it). With the extra space, we added functions like CAN single-wire transceiver controls, a ‘protocol active’ led output, etc. Firmware version 2.2 is the most recent revision. This IC requires a Vdd supply of 4.2V to 5.5V.

ELM329L – low voltage version of the ELM329
This integrated circuit supports all of the ELM329 v2.2 functions, but operates with lower voltage supplies (from 2.0V to 5.5V).

Why buy an ELM329?

If you are not interested in the older OBDII protocols (SAE J1850, ISO 9141, or ISO 14230), and only want CAN (ISO 11898, ISO 15765, SAE J1939, NMEA 2000, etc.) then the ELM329 may be a better choice for you.

Here are some of the ELM327 – ELM329 differences in chart form:

ELM327
v2.2ELM327L
v2.2ELM329

Elm327 Ver 1.2a Usb Drivers

v2.2ELM329L
v2.2Operating Voltage4.2V to 5.5V2.0V to 5.5V4.2V to 5.5V2.0V to 5.5VNumber of IC Pins28282828Low Power (sleep) Mode✓✓✓✓Settings Retained on Wake✓✓✓✓RS232 Transmit Buffer Bytes51220485122048Automatically Formats Long (>8 byte) MessagesNoNoNoNoCAN Periodic Messages––✓✓User Definable CAN Protocols2255Single Wire CAN Transceiver Controls––22CAN Frequency Check For Auto Protocol Searches✓✓✓✓Response Pending (7F xx 78) Support✓✓✓✓General Purpose Inputs––22

General Purpose Ouputs––

Elm327 Ver 1.2a Usb Driver Vga

11Hardware-based CAN Activity Monitor––✓✓Protocol Active Output

Elm327 Usb Driver Windows 10

––✓

Elm327 Bluetooth Driver Windows 10

✓

There are also several other differences that make the ELM329 the preferred product if you are only dealing with CAN protocols. Please refer to the respective data sheets for more information.

OBD Software Development

Elm327 Ver 1.2a Usb Driver Installer

ELM328 – OBD Device Identifier Test IC
The ELM327 provides a function for writing a unique identifier (ie serial number) to memory. Once set, it can not be changed, however, which poses a problem when developing software for this function. The ELM328 allows the identifier to be erased and the internal code to be reset repeatedly, so that software can be developed for this function (without having to use a new chip every time you run the code).